METAL CONDITIONER® for Transmissions

METAL CONDITIONER® is designed for creating special operating conditions for mechanical transmission units and mechanisms, under which high-efficient multilevel system for protection against wear and overloads is formed.

APPLICATION:

• reduce noise and vibration 
• extend life span of transmission parts by 4 times! 
• decrease fuel consumption of cars with cross-country capacity after treatment of a transmission, transfer box or an axle gear.

METAL CONDITIONER® is formulated on basis of full synthetic polyatomic polymer and a balanced package of antioxidant and extreme pressure additives. Due to the covalent atomic bond polymer molecules are very stable to deconstructive influence of local overloads in the friction area. It allows avoiding contact “METAL – METAL” in the friction area for the whole life span of the oil.

APPLICATION PROCEDURE:

Add METAL CONDITIONER® into transmission oil, it will serve you the whole life span of the oil.

1. Shake the can.

2. Spray the content into the oil filler neck of a mechanical transmission, transfer box or an axle gear.

3. Run the car in a regular operating mode without any restrictions.

DOSAGE:

150 ml (1 can) per 2 L of transmission oil

75 ml of the product (spray during 1 min) per 1 L of transmission oil.

Use the product every time you change oil.

!!! Does not contain fluoropolymers, graphite, ferrous and non-ferrous metals, ceramics, esters. Nontoxic and not flammable. The product is compatible with any kind of transmission oils and other lubricants for transmissions.

Does not change oil viscosity!